TERA Ohmmeter TOM 610

TERA Ohmmeter TOM 610

The TERA Ohmmeter TOM 610 is perfectly suited for mobile use in industrial areas due to its compact design and battery operation. It can also be operated stationary with a plug-in charger.

The Tom 610 is operated with only two buttons and the touch panel. It is also menu-driven and therefore very user-friendly. All set measuring parameters are shown on the display for better orientation.

The enclosed PC software enables the TOM 610 to be operated computer controlled. In addition, measurement results can be managed and further processed.

The TOM 610 works according to the current voltage measuring method. To perform measurements according to specified standards, such as DIN EN 61340 or EOS-ESD 4.1/6.1, the measuring time prescribed in the standard can be set via the internal timer. As a world novelty the “Break-Down” resistance and the “Break-OFF” time can be measured.

The measured values including the environmental parameters can be stored in the internal Memory (up to 200 data sets). Thereby the measurements are maintained and can be read out later via the USB interface..

Category:
Get Quote

As the resistance values depend very much on the air humidity and room temperature, these influences are measured and stored together with the resistance value. This ensures a reproducible measurement. The date and time are also stored.

Technical Specifications

Dimensions: 224mm x 81mm x 40mm (L x W x H)
Weight:  350g
Display: Graphic touch display
Display field 75 mm x 50 mm
PC- Interface: USB Interface
PC-Software: TOM_ReadOut
Battery: 4xAA-NiMH 2100mAh
Operation time with fully charged battery: >12 hours permanent operation
Charging time with provided power supply: max. 14 hours
Measuring range: Resistance: 1kΩ..10TΩ Accurarcy ± 10%

Temperature: 0°…60°C Accurarcy ±3°C

Relative air humidity: 20%…80% Accurarcy ± 5%
Power supply: 9V-DC / 300 mA

Reviews

There are no reviews yet.

Be the first to review “TERA Ohmmeter TOM 610”

Your email address will not be published. Required fields are marked *

Related products

  • MM311 MM312 Wrist Strap Online Monitor (Self-Locking Type)
    ESD Testing Equipments

    MM311 MM312 Wrist Strap Online Monitor (Self-Locking Type)

    Continuous monitoring of the wristband improves product quality and productivity, while eliminating the need for routine testing and recording of results. According to ANSI/ESD-S1.1 Clause 6.1.3 Functional Testing: “The system resistance of the wristband should be checked daily to ensure proper values. Daily testing can be omitted if used for continuous monitoring. In ESD TR20.20 clause 5.3.2.4.4, a typical test procedure is recommended: “The wrist strap should be checked daily for routine use. However, how to ensure the continuity of product quality in production, then reliable grounding, as well as continuous monitoring of the wrist strap should be considered is required.

    Read more
  • EFM 113B/115
    ESD Testing Equipments

    EFM 113B/115

    The EFM 113B / 115 is a small and handy electro field meter with a high sensitivity designed for the measurement of dc fields and static charges according to the fieldmill influence principle.

    Read more
  • MC158Pro MC158 MC157 Charging Pad Monitor
    ESD Testing Equipments

    MC158Pro MC158 MC157 Charging Pad Monitor

    The Charge Plate Monitor is a professional device for evaluating the performance of air ionisers. It has a 7-inch touch screen for easy operation and intuitive data display, and complies with international standards (IEC61340-5-1 and ANSI/ESD STM3.1). Its high-precision measurement (0.1V resolution, DC-80Hz) can accurately test AC/DC static eliminators, especially suitable for high-frequency AC ioniser testing. Its detachable test plate design is suitable for small spaces and internal testing, avoiding interference. Its built-in temperature and humidity sensors monitor environmental impact, support automatic determination (PASS), data export (USB/U disk) and long-lasting lithium battery power supply. It is the ideal tool for ESD electrostatic protection, ion balance testing, cleanroom monitoring and other scenarios, ensuring the efficient and reliable performance evaluation of ionisers.

    Read more
  • MC137 MC138 Charging Pad Monitoring Device-Integrated
    ESD Testing Equipments

    MC137 MC138 Charging Pad Monitoring Device-Integrated

    The charging pad monitor is a high-precision test equipment that complies with international standards for evaluating the performance of air ionizers. It is suitable for measuring a variety of ionizers and its 5-inch touch screen is easy to operate. The device has a detachable test plate for testing in small spaces and inside process equipment, and it can accurately detect high-frequency AC ion fan performance. It also has a large-capacity lithium battery for long-term use.

    Read more
Scroll to Top